carbide burrs
ABCDEFGHJKLMN
Carbide burrs ,top with tungsten carbide,HRA91,shank with steel.
Fine finishing on all kinds of metal mould cavity,working on all kinds of metal and nonmetal's Craft sculpture.
Fine finishing on all kinds of metal mould cavity,working on all kinds of metal and nonmetal's Craft sculpture.
Quantity
Carbide Burrs
Material:top with tungsten carbide,HRA91,shank with steel.
Cuts: single cuts ,Double cuts,Aluminium Cuts
Application:
1.Fine finishing on all kinds of metal mould cavity,like shoes mould.
2.working on all kinds of metal and nonmetal's Craft sculpture.
3.cleaning those trimming,burrs and weld line on casting ,forge and weldment part.
4.chamfering and rounding and processing the bore surface on machine part , cleaning the pipeline
5 sleeking on the impeller runner part.
1.mostly using on the electrical tools and air tools drives(also can be machine tool), rotate speed is 6000-40000rds/m.the carbide burrs needbe correct clamped,cutting direction should be uniformly moving from right to left ,can't be to-and-fro motion.using the goggles to avoid to smear metal splashing.
2.can't increase too big pressure in the case of the grinding machine's speed is decreasing,if so,will cause the carbide buurs too hot and get dull easily..
3.the carbide burrs should be contacted with workpiece enoughly,then the more cutting edge can go deep in to the workpiece,and make the better effect .
4,should avoid the shank to contacting with workpiece,if so,the carbide burrs will be very hot and destroy the copper welding joint .
5.in operation,can use some lubricants ,like iquid wax lubricants and synthetic lubricants,can add some lubricant into carbide burrs head regularly.
Carbide burrs's Package 1: plastic tube
Carbide burrs's Package 2:Aluminium Box
